西门子标准CPU_PLC_人机界面_供应

上海湘昌自动化设备有限公司（西门子代理商）

联系人:李军（先生)工程师

手机：13037425070

电话：021-60524801 传真（FAX）:021-57893688

工作QQ：390380550

E-mail:390380550@QQ.COM

24小时销售技术咨询： 13037425070

地址：上海市松江区新浜工业园甪彭路18号

高端性能范围内的高性能 CPU
适用于对性能要求很高的工厂
CPU 416-3 PN/DP 中集成了 PROFINET 功能

Area of application

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP includes switch functionality when the ERTEC 400-ASIC is used. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:
Only the 6ES7 964-2AA04-0AB0 interface submodule may be used.

Design

Both CPUs are equipped with the following:

Powerful processor:
The CPUs achieve instruction execution times as low as 0.03 µs per binary instruction.
CPU 416-2: 5.6 MB RAM (of which 2.8 MB each for program and data);
CPU 416-3: 11.2 MB RAM (of which 5.6 MB each for program and data);
CPU 416-3 PN/DP: 11.2 MB RAM (of which 5.6 MB each for program and data);
fast RAM for parts of the user program relevant to execution.
Flexible expansion:
Up to 262144 digital and 16384 analog inputs/outputs.
Multi-point interface MPI:
With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
Mode selector switch:
Designed as toggle switch.
Diagnostics buffer:
The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.
Real-time clock:
The date and time are appended to diagnostic messages of the CPU.
Memory card:
For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available
Combined MPI/DP interface and integrated PROFIBUS DP interface (CPU 416-2 and CPU 416-3):
The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming).
Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master according to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

A module slot:
An additional PROFIBUS DP master system can be connected via the IF 964-DP interface module.

CPU 416-3 PN/DP additionally includes:

PROFINET interface with 2 ports (switch):
- PROFINET I/O, 256 IO devices connectable
- PROFINET CBA

Functions

Block protection:
A password concept protects the user program from unauthorized access.
Integral HMI services:
The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
Integrated communications functions:
- PG/OP communication
- Shared data communication
- S7 standard communication
- S7 communication
Firmware update using network

CPU 416-3 PN/DP additional:

Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006)
Distributed intelligence in Component Based Automation (CBA) on PROFINET
Additional diagnostic options with integrated web server

Parameterizable attributes

The STEP 7 tool "Hardware Configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

Multi-point interface MPI:
- Definition of station addresses.
- Startup/cycle behavior
- Stipulation of the maximum cycle time and communications load
Address assignment:
Addressing of I/O modules.
Retentive ranges:
Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.
Size of the process image, local data.
Length of the diagnostics buffer
Protection level:
Definition of access authorization for program and data
System diagnostics:
Definition of the handling and scope of diagnostic messages
Timed interrupts:
Setting of periodicity

CPU 416-3 PN/DP additional:

PROFINET interface
Parameterization of time synchronization using NTP procedure

Indication and information functions

Status and error indicators:
LEDs indicate internal and external errors and operating states such as RUN, STOP, Restart, Test function, for example
Test functions:
The programming device can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components
Information functions:
The programming device can be used to provide the user with information on the memory capacity and operating mode of the CPU and the current utilization of the working and load memories

Technical Specifications

scriptions="b2 a_i " hsdl-percent="10 10.0 10.0 10.0" style="border: 0px none; border-spacing: 0px; margin: 20px 0px 0px; padding: 0px; color: rgb(0, 0, 0); font-size: 11px; background-color: rgb(248, 248, 248);">

	6ES7 416-2XN05-0AB0	6ES7 416-3XR05-0AB0	6ES7 416-3ES06-0AB0
	CPU 416-2	CPU 416-3	CPU416-3 PN/DP
General information
Hardware product version	04	04	01
Firmware version	V5.3	V5.3	V6.0
CiR - Configuration in RUN
CiR synchronization time, basic load	100 ms	100 ms	100 ms
CiR synchronization time, time per I/O slave	10 µs	10 µs	10 µs; Time per I/O byte
Supply voltage
24 V DC	No; Power supply via system power supply	No; Power supply via system power supply	No; Power supply via system power supply
Input current
from CPU, max.	Not relevant for 400 series (300 series set)	Not relevant for 400 series (300 series set)	Not relevant for 400 series (300 series set)
from backplane bus 5 V DC, typ.	0.9 A	1.1 A	1.3 A
from backplane bus 5 V DC, max.	1.1 A	1.3 A	1.5 A
from backplane bus 24 V DC, max.	300 mA; 150 mA per DP interface	450 mA; 150 mA per DP interface	300 mA; 150 mA per DP interface
from interface 5 V DC, max.	90 mA; At each DP interface	90 mA; At each DP interface	90 mA; At each DP interface
Power losses
Power loss, typ.	4.5 W	5.5 W	6.5 W
Power loss, max.	5 W	6 W	7.5 W
Memory
Type of memory	RAM	RAM	RAM
Work memory
integrated	5.6 Mbyte	11.2 Mbyte	16 Mbyte
integrated (for program)	2.8 Mbyte	5.6 Mbyte	8 Mbyte
integrated (for data)	2.8 Mbyte	5.6 Mbyte	8 Mbyte
expandable	No	No	No
Load memory
expandable FEPROM	Yes; with Memory Card (FLASH)	Yes; with Memory Card (FLASH)	Yes; with Memory Card (FLASH)
expandable FEPROM, max.	64 Mbyte	64 Mbyte	64 Mbyte
integrated RAM, max.	1 Mbyte	1 Mbyte	1 Mbyte
expandable RAM	Yes; with Memory Card (RAM)	Yes; with Memory Card (RAM)	Yes; with Memory Card (RAM)
expandable RAM, max.	64 Mbyte	64 Mbyte	64 Mbyte
Backup
present	Yes	Yes	Yes
with battery	Yes; all data	Yes; all data	Yes; all data
without battery	No	No	No
Battery
Backup battery
Battery operation	Not relevant	Not relevant	Not relevant
Backup current, typ.	125 µA; (up to 40 °C)	125 µA; (up to 40 °C)	125 µA; (up to 40 °C)
Backup current, max.	550 µA	550 µA	450 µA
Backup time, max.	See reference manual, module data, Chapter 3.3	See reference manual, module data, Chapter 3.3	Dealt with in the module data manual with the secondary conditions and the factors of influence
Feeding of external backup voltage to CPU	5 to 15 VDC	5 to 15 VDC	5 to 15 VDC
CPU processing times
for bit operations, typ.	30 ns	30 ns	30 ns
for word operations, typ.	30 ns	30 ns	30 ns
for fixed point arithmetic, typ.	30 ns	30 ns	30 ns
for floating point arithmetic, typ.	90 ns	90 ns	90 ns
CPU-blocks
DB
Number, max.	10 000	10 000	10 000
Size, max.	64 kbyte	64 kbyte	64 kbyte
FB
Number, max.	5 000	5 000	5 000
Size, max.	64 kbyte	64 kbyte	64 kbyte
FC
Number, max.	5 000; Number range: 0 to 7999	5 000; Number range: 0 to 7999	5 000; Number range: 0 to 7999
Size, max.	64 kbyte	64 kbyte	64 kbyte
OB
Size, max.	64 kbyte	64 kbyte	64 kbyte
Number of free cycle OBs	1	1	1
Number of time alarm OBs	8	8	8
Number of delay alarm OBs	4	4	4
Number of time interrupt OBs	9	9	9
Number of process alarm OBs	8	8	8
Number of DPV1 alarm OBs	3; OB 55-57	3; OB 55-57	3; OB 55-57
Number isochronous mode OBs	4; OB 61-64	4; OB 61-64	4; OB 61-64
Number of multicomputing OBs	1; OB 60	1; OB 60	1; OB 60
Number of background OBs	1; OB 90	1; OB 90	1; OB 90
Number of startup OBs	3	3	3
Number of asynchronous error OBs	9	9	9
Number of synchronous error OBs	2	2	2
Nesting depth
per priority class	24	24	24
additional within an error OB	2	2	2
Counters, timers and their retentivity
S7 counter
Number	2 048	2 048	2 048
Retentivity
adjustable	Yes	Yes	Yes
lower limit	0	0	0
upper limit	2 047	2 047	2 047
preset	Z 0 to Z 7	Z 0 to Z 7	Z 0 to Z 7
Counting range
lower limit	0	0	0
upper limit	999	999	999
IEC counter
present	Yes	Yes	Yes
Type	SFB	SFB	SFB
Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
S7 times
Number	2 048	2 048	2 048
Retentivity
adjustable	Yes	Yes	Yes
lower limit	0	0	0
upper limit	2 047	2 047	2 047
preset	No times retentive	No times retentive	No times retentive
Time range
lower limit	10 ms	10 ms	10 ms
upper limit	9 990 s	9 990 s	9 990 s
IEC timer
present	Yes	Yes	Yes
Type	SFB	SFB	SFB
Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area, total	Total working and load memory (with backup battery)	Total working and load memory (with backup battery)	Total working and load memory (with backup battery)
Flag
Number, max.	16 kbyte; Size of bit memory address area	16 kbyte; Size of bit memory address area	16 kbyte; Size of bit memory address area
Retentivity available	Yes	Yes	Yes
Retentivity preset	MB 0 to MB 15	MB 0 to MB 15	MB 0 to MB 15
Number of clock memories	8; in 1 memory byte	8; in 1 memory byte	8; in 1 memory byte
Data blocks
Number, max.	10 000; Number range: 1 to 16000	10 000; Number range: 1 to 16000	10 000; Number range: 1 to 16000
Size, max.	64 kbyte	64 kbyte	64 kbyte
Local data
adjustable, max.	32 kbyte	32 kbyte	32 kbyte
preset	16 kbyte	16 kbyte	16 kbyte
Address area
I/O address area
Inputs	16 kbyte	16 kbyte	16 kbyte
Outputs	16 kbyte	16 kbyte	16 kbyte
of which, distributed
MPI/DP interface, inputs	2 kbyte	2 kbyte	2 kbyte
MPI/DP interface, outputs	2 kbyte	2 kbyte	2 kbyte
DP interface, inputs	8 kbyte	8 kbyte	8 kbyte
DP interface, outputs	8 kbyte	8 kbyte	8 kbyte
PN interface, inputs			8 kbyte
PN interface, outputs			8 kbyte
Process image
Inputs, adjustable	16 kbyte	16 kbyte	16 kbyte
Outputs, adjustable	16 kbyte	16 kbyte	16 kbyte
Inputs, default	512 byte	512 byte	512 byte
Outputs, default	512 byte	512 byte	512 byte
consistent data, max.	244 byte	244 byte	244 byte
Access to consistent data in process image	Yes	Yes	Yes
Subprocess images
Number of subprocess images, max.	15	15	15
Digital channels
Inputs	131 072	131 072	131 072
Outputs	131 072	131 072	131 072
Inputs, of which central	131 072	131 072	131 072
Outputs, of which central	131 072	131 072	131 072
Analog channels
Inputs	8 192	8 192	8 192
Outputs	8 192	8 192	8 192
Inputs, of which central	8 192	8 192	8 192
Outputs, of which central	8 192	8 192	8 192
Hardware configuration
Expansion devices, max.	21	21	21
connectable OPs	63	63	95
Multicomputing	Yes; 4 CPUs max. (with UR1 or UR2)	Yes; 4 CPUs max. (with UR1 or UR2)	Yes; 4 CPUs max. (with UR1 or UR2)
Interface modules
Number of connectable IMs (total), max.	6	6	6
Number of connectable IM 460s, max.	6	6	6
Number of connectable IM 463s, max.	4; IM 463-2	4; IM 463-2	4; IM 463-2
Number of DP masters
integrated	2	2	1
via IM 467	4	4	4
via CP	10; CP 443-5 Extended	10; CP 443-5 Extended	10; CP 443-5 Extended
Mixed mode IM + CP permitted	No; IM 467 not suitable for use with CP 443-5 Ext. and CP443-1 EX4x, EX20, GX20 (in PNIO mode)	No; IM 467 not suitable for use with CP 443-5 Ext. and CP443-1 EX4x, EX20, GX20 (in PNIO mode)	No; IM 467 not suitable for use with CP 443-5 Ext. and CP443-1 EX4x, EX20, GX20 (in PNIO mode)
via interface module	0	1	1; IF 964-DP
Number of pluggable S5 modules (via adapter capsule in central device), max.	6	6	6
Number of IO Controllers
integrated	0	0	1
via CP	4; No mixed operation of CP443-1 EX40 and CP443-1 EX 41/EX20/GX20, max. 4 in central controller	4; No mixed operation of CP443-1 EX40 and CP443-1 EX 41/EX20/GX20, max. 4 in central controller	4; No mixed operation of CP443-1 EX40 and CP443-1 EX 41/EX20/GX20, max. 4 in central controller
Number of operable FMs and CPs (recommended)
FM	Limited by number of slots and number of connections	Limited by number of slots and number of connections	Limited by number of slots or number of connections
CP, point-to-point	CP 440: Limited by number of slots; CP 441: limited by number of connections	CP 440: Limited by number of slots; CP 441: limited by number of connections	CP 440: Limited by number of slots; CP 441: Limited by number of slots and number of connections
PROFIBUS and Ethernet CPs	14	14	14
Slots
Required slots	1	2	2
Time of day
Clock
Hardware clock (real-time clock)	Yes	Yes	Yes
battery-backed and synchronizable	Yes	Yes	Yes
Resolution	1 ms	1 ms	1 ms
Deviation per day (buffered), max.	1.7 s; Power off	1.7 s; Power off	1.7 s; Power off
Deviation per day (unbuffered) max.	8.6 s; For power On	8.6 s; For power On	8.6 s; For power On
Operating hours counter
Number	16	16	16
Number/Number range	0 to 15	0 to 15	0 to 15
Range of values	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
Granularity	1 hour	1 hour	1 hour
retentive	Yes	Yes	Yes
Clock synchronization
supported	Yes	Yes	Yes
to MPI, master	Yes	Yes	Yes
to MPI, slave	Yes	Yes	Yes
to DP, master	Yes	Yes	Yes
to DP, slave	Yes	Yes	Yes
in AS, master	Yes	Yes	Yes
in AS, slave	Yes	Yes	Yes
on Ethernet via NTP	No; via CP	No; via CP	Yes; as client
to IF 964 DP	No	Yes	Yes
Time difference in system when synchronizing via
Ethernet, max.			10 ms
MPI, max.	200 ms	200 ms	200 ms
Digital outputs
integrated channels (DO)	0	0	0
Interfaces
Interfaces	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 1 x PROFIBUS DP (optionally pluggable)	1 x MPI/PROFIBUS DP, 1 x PROFINET (2 ports), 1 x PROFIBUS DP (optionally pluggable)
Number of USB interfaces	0	0	0
Number of parallel interfaces	0	0	0
Number of 20 mA interfaces (TTY)	0	0	0
Number of RS 232 interfaces	0	0	0
Number of RS 422 interfaces	0	0	0
Number of other interfaces	0	0	0
1st interface
Interface type	integrated	integrated	integrated
Physics	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI
Isolated	Yes	Yes	Yes
Power supply to interface (15 to 30 V DC), max.	150 mA	150 mA	150 mA
Number of connection resources	MPI: 44, DP: 32	MPI: 44, DP: 32	MPI: 44, DP: 32
Functionality
MPI	Yes	Yes	Yes
DP master	Yes	Yes	Yes
DP slave	Yes	Yes	Yes
MPI
Number of connections	44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
Services
PG/OP communication	Yes	Yes	Yes
Routing	Yes	Yes	Yes
Global data communication	Yes	Yes	Yes
S7 basic communication	Yes	Yes	Yes
S7 communication	Yes	Yes	Yes
S7 communication, as client	Yes	Yes	Yes
S7 communication, as server	Yes	Yes	Yes
DP master
Number of connections, max.	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
Number of DP slaves, max.	32	32	32
Services
PG/OP communication	Yes	Yes	Yes
Routing	Yes	Yes	Yes
Global data communication	No	No	No
S7 basic communication	Yes	Yes	Yes
S7 communication	Yes	Yes	Yes
S7 communication, as client	Yes	Yes	Yes
S7 communication, as server	Yes	Yes	Yes
Equidistance mode support	Yes	Yes	Yes
Isochronous mode	Yes	Yes	Yes
SYNC/FREEZE	Yes	Yes	Yes
Activation/deactivation of DP slaves	Yes	Yes	Yes
Direct data exchange (slave-to-slave communication)	Yes	Yes	Yes
DPV1	Yes	Yes	Yes
Address area
Inputs, max.	2 kbyte	2 kbyte	2 kbyte
Outputs, max.	2 kbyte	2 kbyte	2 kbyte
User data per DP slave
User data per DP slave, max.	244 byte	244 byte	244 byte
Inputs, max.	244 byte	244 byte	244 byte
Outputs, max.	244 byte	244 byte	244 byte
Slots, max.	244	244	244
per slot, max.	128 byte	128 byte	128 byte
DP slave
Number of connections	32	32	32
GSD file	http://support.automation.siemens.com/WW/view/de/113652	http://support.automation.siemens.com/WW/view/de/113652	http://support.automation.siemens.com/WW/view/de/113652
Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
Automatic baud rate search	No	No	No
Address area, max.	32; Virtual slots	32; Virtual slots	32; Virtual slots
User data per address area, max.	32 byte	32 byte	32 byte
User data per address area, of which consistent, max.	32 byte	32 byte	32 byte
Services
PG/OP communication	Yes; with interface active	Yes; with interface active	Yes; with interface active
Routing	Yes; with interface active	Yes; with interface active
S7 routing	Yes; with interface active	Yes; with interface active	Yes; with interface active
Global data communication	No	No	No
S7 basic communication	No	No	No
S7 communication	Yes	Yes	Yes
S7 communication, as client	Yes	Yes	Yes
S7 communication, as server	Yes	Yes	Yes
Direct data exchange (slave-to-slave communication)	No	No	No
DPV1	No	No	No
Transfer memory
Inputs	244 byte	244 byte	244 byte
Outputs	244 byte	244 byte	244 byte
2nd interface
Interface type	integrated	integrated	PROFINET
Physics	RS 485 / PROFIBUS	RS 485 / PROFIBUS	Ethernet RJ45
Isolated	Yes	Yes	Yes
Integrated switch			Yes
Number of ports			2
Power supply to interface (15 to 30 V DC), max.	150 mA	150 mA
Automatic detection of transmission speed			Yes; Autosensing
Autonegotiation			Yes
Autocrossing			Yes
Change of IP address at runtime, supported			Yes; Assignment by higher-level IO-Controller or by the user program with SFB104 "IP_CONF"
Number of connection resources	32	32	96
Media redundancy
supported			Yes
Switchover time on line break, typically			200 ms
Number of stations in the ring, max.			50
Functionality
DP master	Yes	Yes	No
DP slave	Yes	Yes	No
PROFINET IO Controller			Yes
PROFINET IO Device			Yes
PROFINET CBA			Yes
Open IE communication			Yes
Web server			Yes
Number of HTTP clients			5
Point-to-point connection			No
DP master
Number of connections, max.	32	32
Transmission rate, max.	12 Mbit/s	12 Mbit/s
Number of DP slaves, max.	125	125
Services
PG/OP communication	Yes	Yes
Routing	Yes	Yes
Global data communication	No	No
S7 basic communication	Yes	Yes
S7 communication	Yes	Yes
S7 communication, as client	Yes	Yes
S7 communication, as server	Yes	Yes
Equidistance mode support	Yes	Yes
Isochronous mode	Yes	Yes
SYNC/FREEZE	Yes	Yes
Activation/deactivation of DP slaves	Yes	Yes
Direct data exchange (slave-to-slave communication)	Yes	Yes
DPV1	Yes	Yes
Address area
Inputs, max.	8 kbyte	8 kbyte
Outputs, max.	8 kbyte	8 kbyte
User data per DP slave
User data per DP slave, max.	244 byte	244 byte
Inputs, max.	244 byte	244 byte
Outputs, max.	244 byte	244 byte
Slots, max.	244	244
per slot, max.	128 byte	128 byte
DP slave
Number of connections	32	32
GSD file	http://support.automation.siemens.com/WW/view/de/113652	http://support.automation.siemens.com/WW/view/de/113652
Transmission rate, max.	12 Mbit/s	12 Mbit/s
Address area, max.	32	32
User data per address area, max.	32 byte	32 byte
User data per address area, of which consistent, max.	32 byte	32 byte
Services
Routing	Yes	Yes
Transfer memory
Inputs	244 byte	244 byte
Outputs	244 byte	244 byte
PROFINET IO Controller
Transmission rate, max.			100 Mbit/s
Number of connectable IO devices, max.			256
Max. number of connectable IO devices for RT			256
of which in line, max.			256
Number of IO devices with IRT and the option "high flexibility"			256
of which in line, max.			61
Number of IO Devices with IRT and the option "high performance", max.			64
of which in line, max.			64
Shared device, supported			Yes
Prioritized startup supported			Yes
Number of IO Devices, max.			32
Activation/deactivation of IO Devices			Yes
Maximum number of IO devices that can be activated/deactivated at the same time.			8
IO Devices changing during operation (partner ports), supported			Yes
Max. number of IO devices per tool			8; 8 parallel calls of the SFC 12 "D_ACT_DP" possible per line. Max. 32 IO Devices changing during operation (partner ports) are supported.
Device replacement without swap medium			Yes
Send cycles			250 μs, 500 μs, 1 ms, 2 ms, 4 ms additionally with IRT with high performance: 250 µs to 4 ms in 125 µs frame
Updating time			250 µs to 512 ms; minimum value depends on preset communication share for PROFINET IO, on the number of IO Devices and on the amount of configured user data, see PROFINET system description
Services
PG/OP communication			Yes
S7 routing			Yes
S7 communication			Yes
Isochronous mode			Yes; Only with IRT and the High Performance option
Open IE communication			Yes
Address area
Inputs, max.			8 kbyte
Outputs, max.			8 kbyte
User data consistency, max.			1 024 byte
PROFINET IO Device
Services
PG/OP communication			Yes
S7 routing			Yes
S7 communication			Yes
Isochronous mode			No
Open IE communication			Yes
IRT			Yes
Prioritized startup			Yes
Shared device			Yes
Number of IO controllers with shared device, max.			2
Transfer memory
Inputs, max.			1 440 byte; Per IO Controller with shared device
Outputs, max.			1 440 byte; Per IO Controller with shared device
Submodules
Number, max.			64
User data per submodule, max.			1 024 byte
PROFINET CBA
acyclic transmission			Yes
Cyclic transmission			Yes
Open IE communication
Open IE communication, supported			Yes
Number of connections, max.			94
Local port numbers used at the system end			0, 20, 21, 25, 80, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535
Keep-alive function, supported			Yes
3rd interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface	Pluggable interface module (IF)
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)	IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Physics		RS 485 / PROFIBUS	RS 485 / PROFIBUS
Isolated		Yes	Yes
Power supply to interface (15 to 30 V DC), max.		150 mA	150 mA
Automatic detection of transmission speed		No	No
Number of connection resources		32	32
Functionality
MPI		No	No
DP master		Yes	Yes
DP slave		Yes	Yes
DP master
Number of connections, max.		32	32
Transmission rate, min.		9.6 kbit/s	9.6 kbit/s
Transmission rate, max.		12 Mbit/s	12 Mbit/s
Number of DP slaves, max.		125	125
Services
PG/OP communication		Yes	Yes
Routing		Yes; S7 routing	Yes; S7 routing
Global data communication		No	No
S7 basic communication		No	Yes
S7 communication		Yes	Yes
S7 communication, as client		Yes	Yes
S7 communication, as server		Yes	Yes
Equidistance mode support		Yes	Yes
Isochronous mode		Yes	Yes
SYNC/FREEZE		Yes	Yes
Activation/deactivation of DP slaves		Yes	Yes
Direct data exchange (slave-to-slave communication)		Yes	Yes
DPV0		Yes	Yes
DPV1		Yes	Yes
Address area
Inputs, max.		8 kbyte	8 kbyte
Outputs, max.		8 kbyte	8 kbyte
User data per DP slave
User data per DP slave, max.		244 byte	244 byte
Inputs, max.		244 byte	244 byte
Outputs, max.		244 byte	244 byte
Slots, max.		244	244
per slot, max.		128 byte	128 byte
DP slave
Number of connections		32	32
GSD file		http://support.automation.siemens.com/WW/view/de/113652	http://support.automation.siemens.com/WW/view/de/113652
Transmission rate, max.		12 Mbit/s	12 Mbit/s
Automatic baud rate search		No	No
Address area, max.		32	32; Virtual slots
User data per address area, max.		32 byte	32 byte
User data per address area, of which consistent, max.		32 byte	32 byte
Services
PG/OP communication		Yes	Yes
Routing		Yes; with interface active
S7 routing		Yes; with interface active	Yes; with interface active
Global data communication		No	No
S7 basic communication		No	No
S7 communication		Yes	Yes
S7 communication, as client		Yes	Yes
S7 communication, as server		Yes	Yes
Direct data exchange (slave-to-slave communication)		No	No
DPV1		No	No
Transfer memory
Inputs		244 byte	244 byte
Outputs		244 byte	244 byte
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes; For PROFIBUS only	Yes; For PROFIBUS only	Yes; Via PROFIBUS DP or PROFINET interface
Number of DP masters with isochronous mode	2	3	2
User data per isochronous slave, max.	244 byte	244 byte	244 byte
equidistance	Yes	Yes	Yes
shortest clock pulse	1 ms; 0.5 ms without use of SFC 126, 127	1 ms; 0.5 ms without use of SFC 126, 127	1 ms; 0.5 ms without use of SFC 126, 127
max. cycle	32 ms	32 ms	32 ms
Communication functions
PG/OP communication	Yes	Yes	Yes
Number of connectable OPs without message processing	63	63	95
Number of connectable OPs with message processing	63; When using alarm_S and alarm_D	63; When using alarm_S and alarm_D	95; When using Alarm_S/SQ and Alarm_D/DQ
Data record routing	Yes	Yes	Yes
Global data communication
supported	Yes	Yes	Yes
Number of GD loops, max.	16	16	16
Number of GD packets, transmitter, max.	16	16	16
Number of GD packets, receiver, max.	32	32	32
Size of GD packets, max.	54 byte	54 byte	54 byte
Size of GD packet (of which consistent), max.	1 variable	1 variable	1 variable
S7 basic communication
supported	Yes	Yes	Yes
User data per job, max.	76 byte	76 byte	76 byte
User data per job (of which consistent), max.	1 variable	1 variable	1 variable
S7 communication
supported	Yes	Yes	Yes
as server	Yes	Yes	Yes
As client	Yes	Yes	Yes
User data per job, max.	64 kbyte	64 kbyte	64 kbyte
User data per job (of which consistent), max.	462 byte; 1 variable	462 byte; 1 variable	462 byte; 1 variable
S5-compatible communication
supported	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
User data per job, max.	8 kbyte	8 kbyte	8 kbyte
User data per job (of which consistent), max.	240 byte	240 byte	240 byte
Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.	64/64	64/64	64/64
Standard communication (FMS)
supported	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB	Yes; Via CP and loadable FB
Open IE communication
TCP/IP			Yes; via integrated PROFINET interface and loadable FBs
Number of connections, max.			94
Data length, max.			32 kbyte
Several passive connections per port, supported			Yes
ISO-on-TCP (RFC1006)	Via CP 443-1 and loadable FB	Via CP 443-1 and loadable FB	Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs
Number of connections, max.			94
Data length, max.	1452 bytes via CP 443-1 Adv.	1452 bytes via CP 443-1 Adv.	32 kbyte; 1452 bytes via CP 443-1 Adv.
UDP			Yes; via integrated PROFINET interface and loadable FBs
Number of connections, max.			94
Data length, max.			1 472 byte
Web server
supported	No	No	Yes
Number of HTTP clients			5
User-defined websites			Yes
PROFINET CBA (at set setpoint communication load)
Setpoint for the CPU communication load			20 %
Number of remote interconnection partners			32
Number of functions, master/slave			150
Total of all Master/Slave connections			6 000
Data length of all incoming connections master/slave, max.			65 000 byte
Data length of all outgoing connections master/slave, max.			65 000 byte
Number of device-internal and PROFIBUS interconnections			1 000
Data length of device-internal und PROFIBUS interconnections, max.			16 000 byte
Data length per connection, max.			2 000 byte
Remote interconnections with acyclic transmission
Sampling frequency: Sampling time, min.			200 ms; Depending on preset communication load, number of interconnections and data length used
Number of incoming interconnections			500
Number of outgoing interconnections			500
Data length of all incoming interconnections, max.			16 000 byte
Data length of all outgoing interconnections, max.			16 000 byte
Data length per connection, max.			2 000 byte
Remote interconnections with cyclic transmission
Transmission frequency: Transmission interval, min.			1 ms; Depending on preset communication load, number of interconnections and data length used
Number of incoming interconnections			300
Number of outgoing interconnections			300
Data length of all incoming interconnections, max.			4 800 byte
Data length of all outgoing interconnections, max.			4 800 byte
Data length per connection, max.			450 byte
HMI variables via PROFINET (acyclic)
Number of stations that can log on for HMI variables (PN OPC/iMap)			2x PN OPC/1x iMap
HMI variable updating			500 ms
Number of HMI variables			1 500
Data length of all HMI variables, max.			48 000 byte
PROFIBUS proxy functionality
supported			Yes; 32 PROFIBUS slaves max. connectable
Data length per connection, max.			240 byte; Slave-dependent
Number of connections
overall	64	64	96
usable for PG communication
reserved for PG communication	1	1	1
Adjustable for PG communication, max.	0	0	0
usable for OP communication
reserved for OP communication	1	1	1
adjustable for OP communication, max.	0	0	0
usable for S7 basic communication
Reserved for S7 basic communication	0	0	0
adjustable for S7 basic communication, max.	0	0	0
usable for S7 communication
reserved for S7 communication	0	0	0
Adjustable for S7 communication, max.	0	0	0
usable for routing
Reserved for routing	0	0	0
adjustable for routing, max.	0	0	0
S7 message functions
Number of login stations for message functions, max.	63; Max. 63 with ALARM_S and ALARM_D (OPs); max. 12 with ALARM_8 and ALARM_P (e.g. WinCC)	63; Max. 63 with ALARM_S and ALARM_D (OPs); max. 12 with ALARM_8 and ALARM_P (e.g. WinCC)	95; Max. 95 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 8 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)
Symbol-related messages	Yes	Yes	Yes
SCAN procedure	Yes	Yes	Yes
Block related messages	Yes	Yes	Yes
Process diagnostic messages	Yes	Yes	Yes
simultaneously active Alarm-S blocks, max.	1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks	1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks	1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Alarm 8-blocks	Yes	Yes	Yes
Number of instances for alarm 8 and S7 communication blocks, max.	4 000	4 000	4 000
preset, max.	600	600	600
Process control messages	Yes	Yes	Yes
Number of archives that can log on simultaneously (SFB 37 AR_SEND)	32	32	32
Number of messages
overall, max.	1 024	1 024	1 024
in 100 ms grid, max.	128	128	128
in 500 ms grid, max.	512	512	512
in 1000 ms grid, max.	1 024	1 024	1 024
Number of additional values
with 100 ms grid, max.	1	1	1
with 500, 1000 ms grid, max.	10	10	10
Test commissioning functions
Status block	Yes; Up to 2 simultaneously	Yes; Up to 2 simultaneously	Yes; Up to 16 simultaneously
Single step	Yes	Yes	Yes
Number of breakpoints	4	4	16
Status/control
Status/control variable	Yes; Up to 16 variable tables	Yes; Up to 16 variable tables	Yes; Up to 16 variable tables
Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Number of variables, max.	70; Status/control	70; Status/control	70; Status/control
Forcing
Forcing	Yes	Yes	Yes
Force, variables	Inputs, outputs, bit memories, peripheral inputs, peripheral outputs	Inputs, outputs, bit memories, peripheral inputs, peripheral outputs	Inputs/outputs, bit memories, distributed I/Os
Number of variables, max.	512	512	512
Diagnostic buffer
present	Yes	Yes	Yes
Number of entries, max.	3 200	3 200	3 200
adjustable	Yes	Yes	Yes
preset	120	120	120
Service data
Can be read out			Yes
EMC
Emission of radio interference acc. to EN 55 011
Limit class A, for use in industrial areas	Yes	Yes	Yes
Limit class B, for use in residential areas	No	No	No
Configuration
Configuration software
STEP 7	Yes	Yes	Yes
programming
Command set	see instruction list	see instruction list	see instruction list
Nesting levels	7	7	7
Access to consistent data in process image	Yes	Yes	Yes
System functions (SFC)	see instruction list	see instruction list	see instruction list
System function blocks (SFB)	see instruction list	see instruction list	see instruction list
Programming language
LAD	Yes	Yes	Yes
FBD	Yes	Yes	Yes
STL	Yes	Yes	Yes
SCL	Yes	Yes	Yes
CFC	Yes	Yes	Yes
GRAPH	Yes	Yes	Yes
HiGraph®	Yes	Yes	Yes
Number of simultaneously active SFCs
DPSYC_FR	2	2	2
D_ACT_DP	8	8	8
RD_REC	8	8	8
WR_REC	8	8	8
WR_PARM	8	8	8
PARM_MOD	1	1	1
WR_DPARM	2	2	2
DPNRM_DG	8	8	8
RDSYSST	8	8	8
DP_TOPOL	1	1	1
Number of simultaneously active SFBs
RD_REC	8	8	8
WR_REC	8	8	8
Know-how protection
User program protection/password protection	Yes	Yes	Yes
Block encryption			Yes; With S7 block Privacy
Dimensions
Width	25 mm	50 mm	50 mm
Height	290 mm	290 mm	290 mm
Depth	219 mm	219 mm	219 mm
Weights
Weight, approx.	0.7 kg	0.9 kg	900 g