ADVANTEST 5585 5581 PE CARD BGM-021633数据fail 维修排除.找徐工13913148881 给你最低的价格及最快的服务.另有大量ADVANTEST 板卡出售
地 址：苏州工业园区星港街263号
联系人：徐生 先生
电 话：86-512-13913148881
手 机：13913148881
| ADV 5335P Board ID |
Qty |
Reversion |
| BGL-020768 P.E. Card |
22 |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
AAA |
| BGL-020768 P.E. Card |
3 |
CIA |
| BGL-020768 P.E. Card |
CIA |
| BGL-020768 P.E. Card |
CIA |
| BGL-020768 P.E. Card |
1 |
CEB |
| BGL-020768 P.E. Card |
1 |
CHA |
| BGL-020768 P.E. Card |
1 |
EBA |
| BGL-021040 O.P.E. Card |
1 |
AAA |
| BGL-021040 O.P.E. Card |
3 |
BCA |
| BGL-021040 O.P.E. Card |
BCA |
| BGL-021040 O.P.E. Card |
BCA |
| BGR-022461 MRA |
3 |
ACA |
| BGR-022461 MRA |
ACA |
| BGR-022461 MRA |
ACA |
| BGR-016796 PPS |
1 |
|
| BGR-016796 PPS |
1 |
CCA |
| BGR-016796 PPS |
4 |
CDB |
| BGR-016796 PPS |
CDB |
| BGR-016796 PPS |
CDB |
| BGR-016796 PPS |
CDB |
| BGR-016796 PPS |
1 |
CEB |
| BGR-016796 PPS |
2 |
CFB |
| BGR-016796 PPS |
CFB |
| BMR-020812 TG |
1 |
CJC |
| BGR-017418 HVPPS |
1 |
ABA |
| BGL-020768 P.E. Card |
| BGL-021040 O.P.E. Card |
| BGL-021040 O.P.E. Card |
| BGL-021040 O.P.E. Card |
| BGL-021040 O.P.E. Card |
| BGR-022461 MRA |
| BGR-022461 MRA |
| BGR-022461 MRA |
| ADV 5371 Board ID |
| BGM-023206 X04 PE card |
| BGM-023206 X04 PE card |
| BGM-023206 X04 PE card |
| BGM-023206 X04 PE card |
| BGM-023206 X04 PE card |
| BGM-023206 X04 PE card |
| BGC-026288 RCPU |
| BGC-026288 MCPU |
| ADV 5375 Board ID |
Qty |
Reversion |
| BGR-026902 DC |
6 |
DAD |
| BGR-026902 DC |
DAD |
| BGR-026902 DC |
DAD |
| BGR-026902 DC |
DAD |
| BGR-026902 DC |
DAD |
| BGR-026902 DC |
DAD |
| BGR-026902 DC |
1 |
BGD |
| BIR-026805 DR PE |
1 |
CCB |
| BIR-026903 PPS |
1 |
EFF |
T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK CHAPTER 2 HARDWARE FUNCTIONS T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.1 Tester Section Outline Attached Door Rotating Shaft Rotating Shaft A T5585 EMO switch Magnet Door *Ready Switch *Program Load Switch *Alarm Switch *PBVCC(TH1,2) Protector Pilot Lamp Door Key Magnet Door POWER OFF ON START READY HALT ALARM TP SDIAG PLOAD RUN Magnet TH1 TH2 PBVCC PBVCC PBVCC PBVCC Child A-D 2-1 Child E-H 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK Test Head On-Board-PS On-Board-PS PE PE LOCK (green) GND for an earth band FREE (white) 2-2 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.2 Unit & Board Layout of Tester Section 2.2.1 T5585 Unit Layout AC CONT Frame & Unit Power Supplies DPU 2 PG/FM TG/TP/TH I/F Voltage Monitor Chiller DPU 1 SC TGFC Front View TG/TP/TH I/F Chiller PG/FM FAN DPU 2 AC CONT Frame & Unit Power Supplies TGFC SC DPU 1 Rear View 2-3 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.2.2 Board Layout of T5585 Tester Units Chiller TGFC SC 2-4 DPU 1 1 2 3 4 5 6 7 8 9 10 11 12 TG/TP/TH I/F UPS 5V3V5V2V5V BGR-024353 TH,VIO IF BGR-024354 PMASK BGR-022449 GPIB,CBOX IF BIR-025697 TG CORE BGR-023258X02 TG BUFF BGR-025708 TG IF BGR-024653 PS MONITOR IF WBL-H36741TP5 UPS 5VDM2B2V5V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 UPS 2V5V3V5V3V BGR-024358 FT DIST BIR-024397 TGFC 7 (P157-160,221-224) BIR-024397 TGFC 6 (P45-50,109-114,173-178,237-242) BIR-024397 TGFC 5 (P33-44,161-172) BIR-024397 TGFC 4 (P1-12,65-76) BGR-024357 PDS2 BGR-024443 SUBCK GEN BGR-024359 PPAT BGR-024357 PDS1 BIR-024397 TGFC 3 (P13-24,77-88,129-140) BIR-024397 TGFC 2 (P97-108,225-236) DUMMY BGR-024356 TGFC IF UPS 3V5VDM5V2B UPS 2V5V3V5V3V BIR-024515 SC 1 (P33-38) BIR-024515 SC 2 (P39-44) BIR-024515 SC 3 (P45-50) BIR-024515 SC 4 (P97-102) BIR-024515 SC 5 (P103-108) BIR-024515 SC 6 (P109-114) BGR-024444 STRB GEN 1 (P33-114) BGR-024362 SC DIST BGR-024363 PCPE BGR-024444 STRB GEN 2 (P161-242) BIR-024515 SC 7 (P161-166) BIR-024515 SC 8 (P167-172) BIR-024515 SC 9 (P173-178) BIR-024515 SC 10 (P225-230) BIR-024515 SC 11 (P231-236) BIR-024515 SC 12 (P237-242) BGR-024361 SC IF UPS 3V5VDM5V2B UPS 3V2V3V2V3V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 UPS 5V3V5V2V5V BIR-021764 PG CONT BIR-021765 ALPG 1 BIR-021765 ALPG 2 BGR-024698 DBM 1 BGR-024698 DBM 2 BGR-024404 FM CONT BIR-024405 AFM 1 BIR-024405 AFM 2 BIR-024405 AFM 3 BIR-024405 AFM 4 BIR-024405 AFM 5 BIR-024405 AFM 6 BIR-024405 AFM 7 BIR-024405 AFM 8 BIR-021769/BGR-021770 (PM/FM TERM) UPS 5V3V5V3V5V UPS 2V3VDM3V2V PG/FM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 UPS 15V3B18V2B UPS 11V3B5V3V UPS 11V5B OPTION BGR-024498 DPU IF BGR-024369 DC 33-48 STN2 BGR-024369 DC 49-64 STN2 BGR-022365 PPS 129-144 STN2 BGR-022365 PPS 145-160 STN2 BGR-022365 PPS 161-176 STN2 BGR-022365 PPS 177-192 STN2 BGR-022365 PPS 225-240 STN2 BGR-022365 PPS 241-256 STN2 OPTION BGR-024498 DPU IF BGR-024369 DC 33-48 STN1 BGR-024369 DC 49-64 STN1 BGR-022365 PPS 129-144 STN1 BGR-022365 PPS 145-160 STN1 BGR-022365 PPS 161-176 STN1 BGR-022365 PPS 177-192 STN1 BGR-022365 PPS 225-240 STN1 BGR-022365 PPS 241-256 STN1 UPS 11V5B UPS 11V3B5V3V UPS 15VDM3B15V UPS 15V3B18V2B UPS 11V3B5V3V UPS 11V5B OPTION BGR-024498 DPU IF BGR-024369 DC 1-16 STN2 BGR-024369 DC 17-32 STN2 BGR-022365 PPS 1-16 STN2 BGR-022365 PPS 17-32 STN2 BGR-022365 PPS 33-48 STN2 BGR-022365 PPS 49-64 STN2 BGR-022365 PPS 97-112 STN2 BGR-022365 PPS 113-128 STN2 OPTION BGR-024498 DPU IF BGR-024369 DC 1-16 STN1 BGR-024369 DC 17-32 STN1 BGR-022365 PPS 1-16 STN1 BGR-022365 PPS 17-32 STN1 BGR-022365 PPS 33-48 STN1 BGR-022365 PPS 49-64 STN1 BGR-022365 PPS 97-112 STN1 BGR-022365 PPS 113-128 STN1 UPS 11V5B UPS 11V3B5V3V UPS 15VDM3B15V DPU 2 AC CONT Frame & Unit Power Supplies 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.2.3 AC CONT Unit Trans Box AC-DC(AIR) UPS-117 AC-DC(CBOX) UPS-118 TEMP SMOKE DMM (6552TR) Leak Water Detector TH FAN UPS-120 PBVCC UPS-121 PBVCC UPS-122 J4 ON-OFF Connecting Panel J1 J2 J3 AC CONT Unit (Front View) Smoke Detector AC-DC(CBOX) UPS-119 AC-DC UPS101 AC-DC UPS103 AC-DC UPS105 AC-DC UPS107 AC-DC UPS102 AC-DC UPS104 AC-DC UPS106 AC-DC UPS108 SUB2 AC CONT A (KH3-71226) MAIN AC CONT FAN AC-DC UPS109 AC-DC UPS111 AC-DC UPS113 AC-DC UPS115 AC-DC UPS110 AC-DC UPS112 AC-DC UPS114 AC-DC UPS116 SUB2 AC CONT B (KH3-71226) Booster (WUN-H 90623AIR) AC CONT Unit (Rear View) 2-5 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.3 System Block Layout 2.3.1 Whole System Block Layout Tester Bus : Vector Bus : DPU Bus : TP DPU TG PPS/DCT DR ALPG PDS TGFC CHVD MUT CP SC FM VIO PE VIO I/F 2-6 2001.5.8 TG 2880ch TH PB SUBCLK RATE Address Signals MUT Control Signals Data Signals DRE Signals Set/Reset TGFC (per-pin) VIO (per-pin) PE PDS Port-A Port-B ALPG 2.3.2 System Block Layout(1/2) Address for FM Data for ROM Expected Value DCTU PM DBM Address PPAT/PDRE PPS CPE PCPE (per-pin) SC PASS FAIL T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2-7 DBM FM Fail Data Mask Data TP5 Ultra 5 2000.3.10 GPIB I/F C-BOX 2.3.3 TG Set/Reset CHVD MUT VIO D/A PB TGFC VIO CONT SH SL DRE PE EXP MASK EXPCK SC FAIL FM PPS REFCLK SUBCLK, SNC System Block Layout (2/2) PAT ALPG T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2-8 ADDRESS DATA MUT FT DIST PDS DC SC DIST 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.4 Whole Layout of Tester Processor System & EWS 2.4.1 Block Layout of EWS Environment Processor Main Frame * Ultra5 CPU Board 10/100Base T Ethernet Graphic VKT Key Board * * * TP I/F TP Tester Mouse 3.5 inch Floppy Disk Option I/F * * Cartridge MT Internal Disk CD-ROM Internal Disk (NOTE) * means environment I/O attached standardly. Computing System Function of Environment Processor: 1.User I/O 2.File Control 3.Editing and Compiling of Program 4.Environmental Resource Control 5.Networking 6.Test Simulation 7.Test Processor Control 2-9 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.4.2 Outlook of TP5 EWS Front View Graphic Monitor (17/21” Monitor) 3.5“Floppy Disk,CDROM Drive Ultra5 Station (with Internal Disk) DISK DISK C.MT 200V AC Terminal 8 lines RS232C Panel 2-10 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.4.3 EWS Cable Connection GRAPHIC MONITOR GRAPHIC MONITOR ULTRA5 station ULTRA5 station C.MT DISK DISK C.MT DISK DISK AC Terminal To Tester AC CONT (OUTPUT for AC200V EWS) Connection of Power Supply Cables to TP5 PCORE3750 “2nd Ethernet” Connection of TP5 & SCSI Cables GRAPHIC MONITOR To MRA4 I/F (8line RS232C) To TP5 J23 (CHBUS) Serial Port A (VKT/UPS) Parallel Port(Printer) To 1‘st Ethernet(10/100BaseT) to keyboard & Mouse Serial Port B TP5 Maintenance Cable TP5 PCore3750 serial port Connection of Other Cables 2-11 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.4.4 Details of Ultra 5 Layout 2 + + 1 9 10 11 12 13 (NOTE1) Parallel Port and Serial Port is the same type of connector(25 pin Dsub). So please be careful not to connect cables wrongly. (NOTE2) When adds SCSI,change it to a standard board and connect. 115V 230V 3 1 2 3 4 5 6 7 8 9 : : : : : : : : : 4 5 6 7 8 Power Switch Power-supply Voltage Change Switch (115V/230V) Outlet of Power Supply Cable AUDIO Port Keyboard Serial Port A (VKT/UPS) Graphic Monitor Ethernet (10/100 Base T) PCI2(2’nd Ethernet Card) H3-6766 (Standard) : Only Ethernet port H3-6736 (Option) :Ethernet + SCSI Port 10 : PCI1 CHBUS I/F 11 : Serial Port B (TP5 PCORE 3750 SERIAL) 12 : PCI3 (ex.MRA 4 BUS I/F Card) <8 lines RS232C Board> 13 : Parallel Port 2-12 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.5 TP/TG/TH IF Unit 2.5.1 TP5 Block Layout CPU Board CPCI3750 WBL-H36741CPU IO Board PCI BUS IF PCI BUS Line TBUS IF Board TP CONT TBUS IN TBUS IF TBUS OUT PCI BUS IF Serial To EWS To CAL Controller BGK-024673 WBL-H36741TP5 2-13 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.5.2 TP 5 Cable Connection CPCI 3750 OPTION SLOT TP5 TBUS I/F No board (no use) Slot 10 J4 TBUS IN From PS Monitor I/F J6 2’nd Ethernet BASET J3 TBUS OUT To PG Control J7 EWS Serial Port B SERIAL EWS CHBUS I/F CH BUS SERIAL 0/1 CAL Controller #1 CAL Controller #2 AC CONT J10 AC CONT LED SERIAL 2/3 Key Switch Panel 2-14 2001.5.8 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.5.3 T-BUS Connection (1/2) WBL-H3674TP5 ü ? ü ? ? ? ? ? ? ? ? ? ? 2-15 2000.3.10 J7 J6 Used Cable:DCB-RR0235X SLOT2 BGR-024353 (TH I/F) X02 J7 J6 TG/TP/TH IF X01 SLOT4 X03 J7 J6 J7 J6 BGR-022449 FTU (CBOX I/F) SLOT7 X01 SLOT8 J4 J3 BGR-025708 (TG I/F) BGR-024653 (PS MONITOR) BGK-024673 (TP5 TH I/F) J7 J6 J7 J6 SLOT14 X03 BGR-024356 (TGFC I/F) T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK SLOT2 ALPG SCU BIR-021764 (PG CONTROL) X03 X02 SLOT10 X03 J7 J6 J7 J6 J7 J6 SLOT5 BGR-024498 (DPU I/F) X01 X03 SLOT5 BGR-024498 (DPU I/F) X03 SLOT18 BGR-024361 (SC I/F) TP5 T-BUS Connection (2/2) DPU2 DPU1 J7 J6 J7 J6 SLOT15 BGR-024498 (DPU I/F) SLOT15 BGR-024498 (DPU I/F) X01 2-16 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK SR Power Supply ? Voltage Monitor Panel ? Main Frame Sensor Cable (Temperature,Smoke and Fan Rotating Sensor) 1.PS Monitor I/F (BGR-024653) *Monitors DC Power-supply Voltage. *Sends voltage value to the voltage Monitor Panel *Sends voltage to DMM through DPU I/F and possible to display the voltage measured by DMM on EWS by “/VLOTAGE” command. 2-17 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.5.5 TG CORE GATE,STOP,STRG,TRIG CK,SYNC0 SYN PG CONT (BIR-021764) Slot 2 SYN FT DIST 1 (BGR-024358) Slot 2 SYN SC DIST (BGR-024362) Slot 9 TG CORE (BIR-025697) SYN Slot 5 J16 TG BUFF (BGR-023258X02) Slot 2 TS SYN J9 ALPG 1 (BIR-021765) Slot 3 J9 ALPG 2 (BIR-021765) Slot 4 2-18 2000.3.10 2.5.6 12 11 10 9 8 7 6 5 4 3 2 1 J12 J13 J14 J16 J17 J13 J20 J21 J12 J16 J15 T-BUS in J18 J19 J11 J15 J11 J16 J17 J14 J10 J11 J10 J14 J15 J13 J12 J12 J12 J11 J14 J13 OPTION J4 Connector Layout of TG/TP/TH IF CPU J10 J9 J11 J12 J9 J10 J12 J13 J9 J10 J9 J9 T-BUS out ETHERNET J20 SERIAL J21 J9 J10 J10 J11 SERIAL J3 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2-19 SERIAL J8 J7 J7 J8 J8 J7 J8 J23 EWS J8 J22 LED J6 J6 J7 J6 J6 J24 J8 J9 J6 J7 J18 J6 J7 J6 J7 AC CONT UPS1 TG I/F TH I/F TP5 UPS12 TG BUF PS MON P-MASK CBOX I/F TG CORE 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.5.7 Board Function (1) TH & VIO I/F (BGR-024353) *Interface with Tester Bus and VIO Control *TH Control *VIO Circuit Control inside P.E. of TH (2) PMASK ( BGR-024354) *PCON signal generating (3) GPIB/CBOX I/F (BGR-022449) *Interface with handler/prober and CBOX (4) TG CORE (BIR-025697) *Generating of RATE signal and REFCLK signal *Generating of SCAL,STD timing (5) TG BUFF (BGR-023258X02) *Distributes the standard clock,logical period signal and other control signal output from TG CORE and output them to SUBCLK generating section. (6) TG I/F (BIR-025708) *Interface with Tester Bus and Unit control (7) PS MON I/F (BGR-024653) *Detects DC power supply of each unit. *Detects Temperature,Smoke and Fan Sensor of Main Frame and Test Head. (8) TP5 BASE (WBL-H36741TP5) * BWB(AAA-K809101*2) *IO and Fuse Board Function (9) TP5 TBUS I/F (BGK-024673) *Interface with each unit’s I/F board (10) TP5 CPU (WBL-H36741CPU) *ALU section of CPU,Main Memory 2-20 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.5.8 TGTP Slot No. and Board Name Slot No. 1 2 3 4 5 6 7 8 9 11 12 Board No. UPS 5V3V5V2V5V BGR-024353 BGR-024354 BGR-022449 BIR-025697 BIR-023258X02 BGR-025708 BGR-024653 WBL-H36741TP5 BGK-024673 WBL-H36741CPU UPS 5VDM2B2V5V Circuit Name Remarks TH/VIO IF PMASK GPIB/CBOX IF TG CORE TG BUFF TG I/F PS MONITOR IF TP5Base(IO+FUSE) IO:BGR-024765 FUSE:BGR-024589 TBUS IF CPU 2-21 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.6 FTU 2.6.1 TGFC BLOCK DIAGRAM 1/3 BWB pattern SUB CLOCK 1 2 3 TGFC 6pcs. (NOTE1) TGFC 7 Slot 3 TGFC 6 Slot 4 TGFC 5 Slot 5 TGFC 4 Slot 6 TGFC 3 Slot 11 Slot 12 TGFC 2 (BIR-024397) RATE TG CORE (BIR-025697) SCLP0 18 Slot 5 SUBCLK GEN (BGR-024443) STATE,STD CLK,STATRIG TH REFCLK TG BUFF (BGR-023258X02) STATE TS SUB CLOCK STRB GEN 1 (BGR-024444) Slot 8 TG UNIT SUB CLOCK STRB GEN 2 (BGR-024444) Slot 11 SC UNIT (NOTE1) TGFC 2 -6 are installed standardly. TGFC7 is installed only when HS CLK(High Speed Clock) Pin Card is installed. Slot 6 Slot 8 2-22 2000.3.10 Board Top VIO SET RESET BUFF CHVD SUBCLK SUB CLK GEN Flip Flop DR Output Signal TS REFCLK 2.6.2 TGFC BLOCK DIAGRAM 2/3 PATA DREL DRET CHVD PDS TGFC LSI 12 pcs Flip DRE Flop PATB PDSCLK T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2-23 EXP Per-pin SNCEXP DRE PE BGR-024252 DRECLK FT DIST PPAT (OPTION) PPAT PDRE PDRCLK SC BIR-024515 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.6.3 TGFC BLOCK DIAGRAM 3/3 BWB STN1 STN2 TGFC LSI J16 J17 TGFC LSI J1 TGFC LSI J14 J15 TGFC LSI J2 TGFC LSI J12 J13 TGFC LSI TH J3 TGFC LSI J10 J11 TGFC LSI J4 TGFC LSI J8 J9 TGFC LSI J5 TGFC LSI J6 J7 TGFC LSI 2-24 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.6.4 TGFC BLOCK DIAGRAM 3 TGFC 2 97 98 99 100 101 102 103 104 105 106 107 108 225 226 227 228 229 230 231 232 233 234 235 236 TGFC 3 13 14 15 16 17 18 19 20 21 22 23 24 77 78 79 80 81 82 83 84 85 86 87 88 TGFC 4 1 2 3 4 5 6 7 8 9 10 11 12 65 66 67 68 69 70 71 72 73 74 75 76 TGFC 5 33 34 35 36 37 38 39 40 41 42 43 44 161 162 163 164 165 166 167 168 169 170 171 172 TGFC 6 45 46 47 48 49 50 109 110 111 112 113 114 173 174 175 176 177 178 237 238 239 240 241 242 TGFC 7 157 158 159 160 221 222 223 224 I/O Channel DR Channel I/O Channel HS CLK 2-25 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.6.5 PDS BLOCK DIAGRAM BTOP BWB PDSCLK J10 ARI0-17 R,W,M1,M2 J9 C0-15,RINV SC (EXP) X0-15,Y0-15 J8 PDS PDS PDS PDS PM0-17 PM18-35 J7 MUX TGFC (PAT) DA0-17 DB0-17 J6 PDS(BGR -024357) 2-26 2000.3.10 15 8 J19 J16 J14 J16 J17 J10 J17 J16 J17 J18 J17 J16 J14 J12 J13 J15 J14 J13 J14 J15 J15 J15 J15 J14 J15 J14 J15 J14 J14 J9 J9 J9 J15 J17 J17 J16 J16 J17 J10 J10 J16 2.6.6 Connector Layout of TGFC 14 13 7 6 5 3 2 1 4 12 11 10 9 J13 J12 J12 J13 J13 J13 J12 J11 J8 J11 J10 J11 J10 J10 J10 J10 J11 J11 J11 J10 J10 J11 J10 J11 J8 J13 J12 J12 J13 J12 J12 J12 J13 J8 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2-27 J9 J8 J9 J9 J8 J9 J8 J8 J9 J8 J7 J7 J8 J9 J8 J9 J6 J7 J6 J6 J6 J7 J7 J6 J7 J6 J7 J6 J6 J7 J6 J7 J10 J11 J7 J8 J9 J8 J9 J6 J6 J7 J6 J7 UPS1 PDS 1 PPAT UPS15 TGFC 2 TGFC 3 TGFC I/F DUMMY TGFC 6 FT DIST TGFC 4 PDS 2 TGFC 5 TGFC 7 SUB GEN 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.6.7 Slot No. and Board Name of TGFC (1) FT DIST BGR-024358 *Inputs DRE signal from ALPG and outputs TGFC. *Sends EXP clock to TGFC and sends expected value from TGFC to SC. *Sends PDRE signal and PDRCLK signal to TGFC to support PPAT of OPTION. (2)TGFC BIR-024397 *Outputs pulse as CLOCK. In the pulse,the delay value is added based on the input test period signal(SUBCLK). *Shapes each pin driver waveform by selected pattern and CLOCK and outputs SET&RESET signal to CHILD VD circuit. *Has old CLK and FC function. (3)PDS BGR-024357 *Inputs X,Y,Z address data and MUT CONT data and selects driver output pattern and comparator expected value pattern. (4)SUBCLK GEN BGR-024443 *Inputs control signal from TG BUFF and generates SUBCLK and various CLK signal and outputs them to STRB GEN,TH,TGFC. (5)TGFC I/F (BGR-024356) *Interface with Tester Bus and Unit Control (6)PPAT (BGR-024359) option *Possible to use with DBM and used for ROM test,etc. 2-28 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.6.8 TGFC Slot No. and Board Name Slot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Board No. UPS 2V5V3V5V3V BGR-024358 BIR-024397 BIR-024397 BIR-024397 BIR-024397 BGR-024357 BGR-024443 BGR-024359 BGR-024357 BIR-024397 BIR-024397 BGR-024356 UPS 3V5VDM5V2B Circuit Name FT DIST TGFC 7 TGFC 6 TGFC 5 TGFC 4 PDS 2 SUBCLK GEN PPAT PDS 1 TGFC 3 TGFC 2 TGFC IF Remarks (P157-160,221-224) (P45-50,109-114,173-178,237-242) (P33-44,161-172) (P1-12,65-76) (P13-24,77-88) (P97-108,225-236) DUMMY BOARD 2-29 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.7 ALPG/FM 2.7.1 ALPG BLOCK DIAGRAM TGFC UNIT TG CORE RATE ALPG1 CPE,CPECLK J13 FLAG ADR DA,DB MUT ARI IN PDS 1 ADR DA,DB MUT ARI IN TP TG TH I/F UNIT ALPG 2 CPE,CPECLK ADR DA,DB MUT ARI IN PDS 2 J13 ADR DA,DB MUT ARI IN SC DIST PG CONT DPU,TGFC,SC START CPE,CPECLK FLAG CPE,CPECLK ORFAIL,ANDFAIL,FSTRB FAIL,MATCH SC UNIT CALP,SCAL,TH TH 2-30 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.7.2 FM BLOCK DIAGRAM J7 J8 ALPG1 (BIR-021765) Slot 3 J9 J10 FM CONT (BGR-024404) J11 ALPG2 (BIR-021765) Slot 4 J12 J13 J14 Slot 7 J8 J8 J8 J8 J8 J8 J8 J8 AFM1 AFM2 AFM3 AFM4 AFM5 AFM6 AFM7 AFM8 SLOT 8 SLOT 9 SLOT 10 SLOT 11 SLOT 12 SLOT 13 SLOT 14 SLOT 15 2-31 2000.3.10 18 J18 J15 J15 J17 17 14 13 12 11 10 9 8 7 6 5 4 3 2 1 16 15 J12 J13 J13 J14 J16 J14 J14 J9 J10 J15 J12 J13 J11 J12 J10 J11 J10 J11 J12 J13 J9 J10 J9 J10 J9 J10 J9 J10 J9 J10 J9 J10 J12 J13 J9 J10 J13 J14 2.7.3 Connector Layout of ALPG/FM J7 J10 J11 J8 J9 J10 J8 J8 J8 J8 J8 J8 J10 J11 J11 J12 J8 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2-32 J7 J8 J8 J9 J6 J7 J6 J7 J6 J7 J6 J7 J6 J7 J6 J7 J6 J7 J8 J9 J6 J6 J7 J6 J7 J8 J9 J8 J9 J9 J6 J6 J7 J7 J7 J8 J6 J6 J6 J7 UPS1 AFM8 AFM7 AFM6 AFM5 AFM4 AFM3 AFM2 AFM1 DBM2 DBM1 PM/TERM UPS18 UPS17 ALPG2 ALPG1 PG CONT FM CONT 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.7.4 Board Function (1) PG CONT (BIR-021764) *Interface with Tester Bus *Interface with TG *Interface with SC *Unit Control (2)ALPG 1/2 (BIR-021765) *Generates address,data and device control signal for applying to MUT. *Generates address signal for FM. (3)DBM (BGR-021698) *Generates pattern for random logic test. (4)FM CONT (BGR-024404) *FM Control.Mainly controls R/W of AFM Memory Board and analyzes failure. (5)AFM (BIR-024405) *Stores fail data and analyzes failure. (6)PM/FM TERM (BIR-021769/BGR-021770) FM TERM when no PM option *PM generates expected value pattern for ROM test.(option) *FM TERM works as terminator. 2-33 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.7.5 ALPG/FM Slot No. and Board Name Slot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Board No. Circuit Name Remarks UPS 5V3V5V2V5V BIR-021764 PG CONTROL BIR-021765 ALPG1 BIR-021765 BGR-024698 BGR-024698 BGR-024404 BIR-024405 BIR-024405 BIR-024405 BIR-024405 BIR-024405 BIR-024405 BIR-024405 BIR-024405 BIR-021769 BGR-021770 UPS 5V3V5V3V5V UPS 2V3VDM3V2V ALPG2 DBM1 DBM2 FM CONT AFM1 AFM2 AFM3 AFM4 AFM5 AFM6 AFM7 AFM8 PM FM TERM 1st ALPG 2nd ALPG 1st DBM option 2nd DBM option 1st option 2nd option 1st option 2nd option 1st option 2nd option 1st option 2nd option When no PM option,FM TERM is installed 2-34 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.8 SC UNIT 2.8.1 SC UNIT BLOCK DIAGRAM 1 BT BWB SH,SL TH FCAL SC I/F (1st,2nd) FT_DIST TGFC EXP ARIRAM PDS (1st,2nd) ARICLK MASK FM FM_FAIL SC x12 FAIL CPE1-4 REFCLK FAIL ALPG CPE1-4 CPECLK REFCLK SC DIST TG TG REFCLK STRB GEN MATCH_STRB STRB PCPCLK DBM DBM option PCPDT PCPE option PCPCLK PCPE SC UNIT 2-35 2000.3.10 20 15 J14 J17 J17 J8 J8 J13 J10 J17 J17 J17 J17 J16 J16 J17 J16 J16 J16 J17 J16 J17 J16 J16 J16 J17 J16 J17 19 18 17 16 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2.8.2 SC Connector Layout J16 J17 J16 J12 J14 J15 J14 J15 J11 J7 J7 J9 J15 J15 J15 J15 J15 J15 J14 J14 J14 J15 J14 J14 J14 J14 J14 J15 J14 J15 J15 J14 J12 J12 J13 J10 J12 J13 J13 J12 J13 J12 J13 J13 J12 J12 J13 J12 J13 J12 J13 J13 J12 J12 J13 J12 J13 J8 J6 J6 J10 J11 J10 J11 J10 J11 J11 J10 J9 J11 J11 J10 J11 J10 J11 J10 J8 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2-36 J7 J8 J9 J9 J9 J9 J9 J8 J8 J8 J8 J8 J9 J8 J9 J8 J9 J7 J7 J6 J7 J7 J7 J6 J6 J6 J6 J7 J6 J6 J7 J6 J7 J6 J7 J10 J11 J10 J10 J11 J10 J11 J10 J11 J7 J8 J9 J8 J8 J9 J8 J9 J8 J9 J6 J6 J7 J6 J6 J7 J6 J7 J6 J7 SC4 SC3 SC2 SC1 UPS SC6 SC5 SC8 SC7 SC9 UPS SC11 SC10 PCPE SC12 SC DIST STRB GEN1 STRB GEN2 SC I/F UPS 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.8.3 SC Board Function (1) SC BIR-024515 *Inputs voltage comparison result(SH,SL) from P.E. and compares it with expected value pattern logically and judge PASS/FAIL. (2) STRB GEN BGR-024444 *Generate STRB signal based on standard signal sent from SUBCLK. (3) SC DIST BGR-024362 *Sends CPE signal to SC. *Outputs FAIL signal to PG. (4) PCPE BGR-024363 (option) *Possible to use with DBM and used for ROM test,etc. (5) SC I/F BGR-024361 *Interface with Tester Bus and SC unit control. 2-37 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.8.4 SC Slot No. and Board Name Slot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Board No. UPS2V5V3V5V3V BIR-024515 BIR-024515 BIR-024515 BIR-024515 BIR-024515 BIR-024515 BGR-024444 BGR-024362 BGR-024363 BGR-024444 BIR-024515 BIR-024515 BIR-024515 BIR-024515 BIR-024515 BIR-024515 BGR-024361 UPS3V5VDM5V2B UPS3V2V3V2V3V Circuit Name SC 1 SC 2 SC 3 SC 4 SC 5 SC 6 STRB GEN SC DIST PCPE STRB GEN 2 SC 7 SC 8 SC 9 SC 10 SC 11 SC 12 SC IF Remarks (P33-38) (P39-44) (P45-50) (P97-102) (P103-108) (P109-114) (P33-50,P97-114) (P161-178,P225-242) (P161-166) (P167-172) (P173-178) (P225-230) (P231-236) (P237-242) 2-38 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.9 DPU 2.9.1 DPU BLOCK DIAGRAM (1 STN configuration) EXT J9 J13 From ALPG J8 (EXT) Tester Bus J7 J6 DPU I/F (BGR-024498) PPS 16CH/pc STN1 PPS1 16 STN1 PPS17 32 STN1 PPS33 48 STN1 PPS49 64 STN1 PPS97 112 STN1 PPS113 128 S15 J12 DMM DC 16CH/pc STN1 DC1 16 STN1 DC17 32 DPU1 J12 J8 DPU I/F (BGR-024498) Tester Bus J7 J6 S15 PPS 16CH/pc STN1 PPS129 STN1 PPS145 STN1 PPS161 STN1 PPS177 STN1 PPS225 STN1 PPS241 144 160 176 192 240 256 DC 16CH/pc STN1 DC33 STN1 DC49 48 64 DPU2 2-39 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK DPU BLOCK DIAGRAM (2 STN Option Configuration) [1/2] EXT J9 J13 From ALPG J8 (EXT) Tester Bus J7 J6 DPU I/F (BGR-024498) PPS 16CH/pc STN1 PPS1 16 STN1 PPS17 32 STN1 PPS33 48 STN1 PPS49 64 STN1 PPS97 112 STN1 PPS113 128 S15 J12 DMM DC 16CH/pc STN1 DC1 16 STN1 DC17 32 J12 J8 DPU I/F (BGR-024498) Tester Bus J7 J6 S5 PPS 16CH/pc STN2 PPS1 16 STN2 PPS17 32 STN2 PPS33 48 STN2 PPS49 64 STN2 PPS97 112 STN2 PPS113 128 DC 16CH/pc STN2 DC1 16 STN2 DC17 32 DPU1 2-40 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK DPU BLOCK DIAGRAM (2 STN Option Configuration) [2/2] 2-41 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.9.2 DPU1 Connector Layout 1 UPS1 UPS2 UPS3 OPTION J13 J12 J11 J9 J10 J8 J7 J6 4 3 2 5 DPU I/F DC 1-16 STN2 J7 6 J7 J6 J6 DC 17-32 STN2 J7 J6 7 PPS 1-16 J7 J6 STN2 8 9 PPS 17-32 STN2 J7 J6 10 PPS 33-48 PPS 49-64 STN2 STN2 STN2 11 J7 J7 J6 J6 12 PPS 97-112 J7 J6 15 14 13 PPS 113-128 STN2 OPTION J13 J11 J12 J9 J10 J8 J7 J6 DPU I/F DC 1-16 STN1 J7 17 16 J7 J6 J6 DC 17-32 STN1 J7 J6 18 PPS 1-16 STN1 J7 J6 19 PPS 17-32 STN1 J7 J6 20 PPS 33-48 STN1 J7 J6 21 PPS 49-64 STN1 J7 J6 22 PPS 97-112 STN1 J6 J7 25 24 23 PPS 113-128 STN1 UPS24 UPS25 UPS26 26 2-42 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK DPU2 Connector Layout 2-43 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.9.3 DPU BLOCK DIAGRAM (1 STN configuration) (1)DPU I/F (BGR-024498) *Interface with Tester Bus and Unit control. *Generates Source Voltage for DCTU,Analog Comparator comparison voltage and Clamp voltage. *Generates Analog comparator comparison voltage for PPS. *A/D conversion of DCTU and Measured data of PPS. *Mounts Diagnostic standard resister and standard voltage circuit of DCTU and PPS. (2) DC (BGR-024369) *Mounts main circuits of analog section of DCTU and outputs voltage/current to DC-MPX’ER board of TH.(16DC/pc) (3) PPS (BGR-022365) *Mounts main circuits of analog section of PPS and outputs VS voltage to TH.(16PPS/pc) 2-44 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.9.4 DPU1 Slot No. and Board Name (1/2) Slot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Board No. UPS 15V3B18V2B UPS 11V3B5V3V UPS 11V5B OPTION BGR-024498 BGR-024369 BGR-024369 BGR-022365 BGR-022365 BGR-022365 BGR-022365 BGR-022365 BGR-022365 OPTION BGR-024498 BGR-024369 BGR-024369 BGR-022365 BGR-022365 BGR-022365 BGR-022365 BGR-022365 BGR-022365 UPS11V5B UPS11V3B5V3V UPS15VDM3B15V Circuit Name Remarks DPU IF DC DC PPS PPS PPS PPS PPS PPS DPU IF DC DC PPS PPS PPS PPS PPS PPS 1-16 STN2 17-32 STN2 1-16 STN2 17-32 STN2 33-48 STN2 49-64 STN2 97-112 STN2 113-128 STN2 1-16 STN1 17-32 STN1 1-16 STN1 17-32 STN1 33-48 STN1 49-64 STN1 97-112 STN1 113-128 STN1 2-45 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK DPU2 Slot No. and Board Name (2/2) Slot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Board No. UPS 15V3B18V2B UPS 11V3B5V3V UPS 11V5B OPTION BGR-024498 BGR-024369 BGR-024369 BGR-022365 BGR-022365 BGR-022365 BGR-022365 BGR-022365 BGR-022365 OPTION BGR-024498 BGR-024369 BGR-024369 BGR-022365 BGR-022365 BGR-022365 BGR-022365 BGR-022365 BGR-022365 UPS 11V5B UPS 11V3B5V3V UPS 15VDM3B15V Circuit Name Remarks DPU IF DC DC PPS PPS PPS PPS PPS PPS DPU IF DC DC PPS PPS PPS PPS PPS PPS 33-48 STN2 49-64 STN2 129-144 STN2 145-160 STN2 161-176 STN2 177-192 STN2 225-240 STN2 241-256 STN2 33-48 STN1 49-64 STN1 129-144 STN1 145-160 STN1 161-176 STN1 177-192 STN1 225-240 STN1 241-256 STN1 2-46 2000.3.10 2.10 TH TH (FH) CW32-63,MCW32-63 LCON1-3 MUT1-32,LCON CW0-31,MCW0-31 LCON1-3 LCON1-3 MUT33-64 TH BUS(TH1,2) P.B (EG) (BD) 2.10.1 TH BLOCK DIAGRAM THVIO I/F CAL/SIG (AC) DUT CAL CAL PAT PAT Normal P.E CPCAL * TGFC T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2-47 (EFGH) DC-MUX (ABCD) I/O P.E OVP PMASK CPS1-64 CPS97-192 CPS225-256 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.10.2 PINCARD BLOCK DIAGRAM LIF Relays / ICs circuits registers circuits 2-48 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.10.3 I/O PINCARD BLOCK DIAGRAM DC CAL VIH HIGH/LOW I/O CONTROL 50R DR Performance Board VIL VOH SH CP SL VOL IOL CP DCLP + DCLP - VT IOH 50R 2-49 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.10.4 Control Signal on P.B. Type PIN LOAD CW Purpose Output point of Test Head Pin Electronics. Connects this point and pin of MUT socket. Used as relay control signal for attaching passive load to P.B. attached to I/O pin. I/O terminal of CW.64. Signal is output to this terminal from test program if necessary and sequence is distributed in the program by reading the level of this terminal.This controls circuits attached on P.B. This signal works same on both two TH. Output point of power supply for devices. Connects this point and power-supply pin of MUT. +5V is output. If necessary,used on P.B. +5V’s max current is 25A. Control signal for connect/disconnect relay of bypass capacitor. Control signal of load changing relay I/O terminal of Control Word.64 for expansion. This signal can set or read in two TH individually. Output of Power Supply for devices Utility Power Supply PCON LCON MCW 2-50 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.10.5 TH Board Location 1. DC MUX (BGR-024352) Interface between DC TEST UNIT and PE. 2.CAL/SIG (BGR-024351) Generates various control signal used on TH(LCON,CONT,CW) Connects with DCTU when the voltage of PE driver and comparator is corrected. Connects with Standard Comparator for timing correction. 3.P.E. (BGR-024252) Inputs SET/RESET signal of Driver Waveform from TGFC board. Receive SET/RESET signal from TGFC circuit and corrects SET/RESET skew and outputs to DR. Connects with DCTU which measures DC characteristic of MUT. Compare the setting voltage(VOH,VOL) with the MUT output and outputs comparison result (SH/SL) to SC board. 2-51 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.10.6 TH Board Location DC MUX (BGR-024352) CAL&SIG (BGR-024351) CAL&SIG (BGR-024351) DUMMY PEX02 (BGR-025800X02) PE 33A-D (P1-3,33-36) (BGR-024252) PPS 1,2,33,34,129,130,161,162 PE 37A-D (P4-6,37-40) (BGR-024252) PPS97,98 ,225,226 PE 41A-D (P7-9,41-44) (BGR-024252) PPS9,10,41,42,137,138,169,170 PE 45A-D (P10-12,45-48) (BGR-024252) PPS105,106,233,234 PE 49A-D (P49,50,113,114) (BGR-024252X02) PPS3,4,35,36,131,132,163,164 PE 97A-D (P65-67,97-100) (BGR-024252) PPS99,100,227,228 PE 101A-D (P68-70,101-104) (BGR-024252) PPS11,12,43,44,139,140,171,172 PE 105A-D (P71-73,105-108) (BGR-024252) PPS107,108 ,235,236 PE 109A-D (P74-76,109-112) (BGR-024252) PPS5,6,37,38 ,133,134,165,166 PE 161A-D (P13-15,161-164) (BGR-024252) PE 165A-D (P16-18,165-168) (BGR-024252) PPS101,102,229,230 PPS13,14,45,46,141,142,173,174 PE 169A-D (P19-21,169-172) (BGR-024252) PE 173A-D (P22-24,173-176) (BGR-024252) PPS109,110,237,238 PE 177A-D (P177,178,241,242) (BGR-024252X02) PPS7,8,39,40,135,136,167,168 PE 225A-D (P77-79,225-228) (BGR-024252) PE 229A-D (P80-82,229-232) (BGR-024252) PPS103,104,231,232 PPS15,16,47,48,143,144,175,176 PE 233A-D (P83-85,233-236) (BGR-024252) PPS111,112,239,240 PE 237A-D (P86-88,237-240) (BGR-024252) PPS17,18,49,50,145,146,177,178 PE 33E-H (P1-3,33-36) (BGR-024252) PE 37E-H (P4-6,37-40) (BGR-024252) PPS113,114,241,242 PPS25,26,57,58,153,154,185,186 PE 41E-H (P7-9,41-44) (BGR-024252) PE 45E-H (P10-12,45-48) (BGR-024252) PPS121,122,249,250 PE 49E-H (P49,50,113,114) (BGR-024252X02) PE 97E-H (P65-67,97-100) (BGR-024252) PPS19,20,51,52147,148,179,180 PPS115,116,243,244 PE 101E-H (P68-70,101-104) (BGR-024252) PE 105E-H (P71-73,105-108) (BGR-024252) PPS27,28,59,60,155,156,187,188 PE 109E-H (P74-76,109-112) (BGR-024252) PPS123,124,251,252 PE 161E-H (P13-15,161-164) (BGR-024252) PPS21,22,53,54,149,150,181,182 PPS117,118,245,246 PE 165E-H (P16-18,165-168) (BGR-024252) PPS 29,30,61,62,157,158,189,190 PE 169E-H (P19-21,169-172) (BGR-024252) PE 173E-H (P22-24,173-176) (BGR-024252) PPS125,126,253,254 PE 177E-H (P177,178,241,242) (BGR-024252X02) PPS 23,24,55,56,151,152,183,184 PE 225E-H (P77-79,225-228) (BGR-024252) PPS119,120,247,248 PE 229E-H (P80-82,229-232) (BGR-024252) PPS31,32,63,64,159,160,191,192 PE 233E-H (P83-85,233-236) (BGR-024252) PPS127,128,255,256 PE 237E-H (P86-88,237-240) (BGR-024252) DUMMY PEX02 (BGR-025800X02) CAL&SIG (BGR-024351) CAL&SIG (BGR-024351) DC MUX (BGR-024352) -6.5V Slave UPS 1-1 -8V UPS 2-1 -3.3V Slave UPS 3-1 -6.5V Slave UPS 4-1 VCC UPS 5-1 VEE UPS 6-1 -6.5V Slave UPS 7-1 -3.3V Master UPS 8-1 -6.5V Slave UPS 9-1 -6.5V Master UPS 10-1 -6.5V Master UPS 11-1 -6.5V Slave UPS 12-1 -3.3V Master UPS 13-1 -6.5V Slave UPS 14-1 VEE UPS 15-1 VCC UPS 16-1 -6.5V Slave UPS 17-1 -3.3 Slave UPS 18-1 -8V UPS 19-1 -6.5V Slave UPS 20-1 +11.5V Slave UPS 1-2 +11.5V Slave UPS 2-2 RLVCC Slave UPS 3-2 +11.5V Master UPS 4-2 +11.5V Slave UPS 5-2 +11.5V Slave UPS 6-2 +11.5V Slave UPS 7-2 RLVCC Master UPS 8-2 +11.5V Slave UPS 9-2 +11.5V Slave UPS 10-2 +11.5V Slave UPS 11-2 +11.5V Slave UPS 12-2 RLVCC Master UPS 13-2 +11.5V Slave UPS 14-2 +11.5V Slave UPS 15-2 +11.5V Slave UPS 16-2 +11.5V Master UPS 17-2 RLVCC Slave UPS 18-2 +11.5V Slave UPS 19-2 +11.5V Slave UPS 20-2 Pin Card Layout There are two types of T5585,full configuration and half configuration. In the case of half configuration,no PE is installed from slot 33E-H to 237E-H. Instead dummy PE is installed. BGR-024252 Normal PE Dr I/O) BGR-024252X02 I/O PE BGR-025800 Dummy PE Dummy PEX02 2-52 2000.3.10 T5585 TEST SYSTEM MAINTENANCE TRAINING TEXTBOOK 2.11 AC CONT Panel POWER OFF ON START READY HALT ALARM TP SDIAG PLOAD RUN TH1 TH2 PBVCC PBVCC PBVCC PBVCC 1.TP SDIAG After turning on the tester,the TP’s basic order is automatically diagnosed and the diagnostic result is displayed by LED. 2.START/READY Lamp START SW : Pressing this SW turns on READY lamp. READY Lamp : If this lamp is ON,POWER ON becomes possible by POW ER SW. 3.HALT SW/ALARM Lamp HALT SW : Pressing this switch turns off TPU forcedly. ALARM Lamp : If this lamp is ON,Power fail, fan error or abnorma l high temperature is detected. 4.PLOAD/RUN Lamp PROGRAM LOAD : Pressing this SW starts TPU operation and executes TPU SDIAG. RUN Lamp : If this lamp is ON,that means TPU is operating. 5.POWER This SW turns ON/OFF the power supply of the system. This SW becomes effective when the READY lamp is ON. 6.Circuit Protector This is the breaker for PBVCC of TH1,2. 2-53 2000.3.10
点击图片查看原图
通过中国触摸屏网金牌会员认证 
